Transfer Board, Theraslide, 29" w/ 2 Notches & 2 HH (1 Perp), Walnut Stained Birch
List
$156.00*HCPCS: NA
*HCPCS codes are manufacturer recommendations and should not be relied upon for reimbursement as payor policies vary.
SKU
31523
Transfer Board, Theraslide, 29" w/ 2 Notches & 2 HH (1 Perp), Walnut Stained Birch
Therafin’s Theraslide Transfer Boards offer a smooth transition from wheelchair to chair. They are made from a 10-ply birch base with 1 additional ply laminated on top; 1/2" thick in the center section tapered to 1/4" at each end; finished with a walnut stain and three clear seal coats. See the details tab for additional features of the board. Stress tested to hold up to 450 pounds.
This Theraslide Transfer Board is a premium board with the following characterstics:
- Premium Transfer Board with tapered ends
- 10-ply Birch plywood base with 1 additional ply laminated on top
- Walnut stained with three clear seal coats
- 1/2" thick in the center, 1/4" thick at either end
- Smooth uninterrupted surface from end to end
- Stress tested with a rated capacity of 450 pounds
- Weighs 2.6 pounds
Transfer boards are eligible for return only if the seal on the original packaging is intact and unbroken. Any transfer board with a broken or tampered seal will not be accepted for return or refund.
Handholds | 2 |
---|---|
Material | Birch 1/2" Stained |
Non_Skid | N |
Notches | Standard |
Size | 29" x 8" |
Tapered | Yes |
Weight Capacity | 450 lbs. |
Weight Class | Standard |
Write Your Own Review