| |
|
RECOMMENDED
CHOICE!!
- Quickly remove Seat
& Back when you need to fold up the chair for transporting
-
Easily reattach Seat &
Back by tightening knobs
-
User-friendly hardware
-
Works with standard or
custom seats and backs
-
Adjust for growth up
to 4"
-
Seat hardware fits
7/8" and 1" tubing
-
Back hardware fits 7/8",
1", and 1-1/8" canes
Use these kits together for
the solution to easy transporting!
|
Back & Seat
Hardware Kits |
Part # |
| Back
Hardware w/Knob Release
|
32395 |
|
(Use
with one of the Seat Hardware Kits below) |
0" Drop for 7/8" chair
1" Drop for 7/8" chair
2" Drop for 7/8" chair
0" Drop for 1" chair
1" Drop for 1" chair
2" Drop for 1" chair |
32842
32843
32844
32845
32846
32847 |
|
 |
|
SECURES
BACK TO CANES |
SECURES
SEAT TO FRAME |
|
Hinged E-Z Grow Knob Hardware Kits
-
E-Z Grow Knob Release
Hardware on
BOTH THE BACK AND SEAT
- Quick to install
-
Simple to adjust (up
to 4")
-
One size fits 7/8",
1", and 1-1/8" tubing
Use these kits together to attach and adjust a
Back & Seat on a wheelchair as a single hinged unit
|
E-Z Grow Knob
Hardware Kits
WITH HINGE |
Part # |
| Back
Hardware w/Knob Release |
32863 |
|
(MUST be used
with one of the Hinged Seat Hardware Kits below) |
0" Offset
Hinged Seat Hardware w/Knob Release
1" Offset Hinged Seat Hardware
w/Knob Release
2" Offset Hinged Seat Hardware w/Knob
Release |
32905
32906
32907 |
|
 |
SECURES
BACK TO CANES |
SECURES
SEAT TO FRAME |
|
-
E-Z Grow Knob Release
Hardware
ONLY ON THE THE BACK
-
Back: One size fits 7/8",
1", and 1-1/8" tubing
Seat: One size fits 7/8" and
1" tubing
This hinged hardware combination doesn't require
you to reach under the seat cushion to
tighten/loosen any knobs
|
E-Z Grow Knob
Hardware Kits
WITH HINGE |
Part # |
| Back
Hardware w/Knob Release |
|
|
(MUST be used
with one of the Hinged Seat Hardware Kits below) |
0" Offset
Hinged Seat Hardware
1"
Offset Hinged Seat Hardware
2" Offset Hinged Seat Hardware |
|
|
Ask Our Customer Service Representative For More Details |
|
|
|
SECURES
BACK TO CANES |
SECURES
SEAT TO FRAME |
|
Independent Seat Hardware Kits
with Knob Release
- Each kit includes
2 raised zero
drop hooks, 2
slotted seat brackets, 2 E-Z Grow hinged knob
mounts, 8 bolts and 8 washers
-
One size fits 7/8",
1", and 1-1/8" tubing
|
|
Independent Seat
Hardware Kit
|
Part # |
| Seat Hardware w/Knob Release |
32396 |
|
 |
SECURES
SEAT TO FRAME |
| |
|
|
Seat Hardware Kits
- Each kit includes 4 drop hooks, 2 universal rail locks, 2
split collars, 8 bolts and 8 washers
|
|
Seat Hardware Kit |
Part # |
0" Drop for 7/8" chair
1" Drop for 7/8" chair
2" Drop for 7/8" chair
0" Drop for 1" chair
1" Drop for 1" chair
2" Drop for 1" chair |
32842
32843
32844
32845
32846
32847 |
|
 |
SECURES
SEAT TO FRAME |
| |
|
Drop Kits
|
|
|
 
Adjustable-Drop Hardware Kits
can be adjusted to raise or lower the
Drop Seat. Kit includes:
four J-Brackets, four L-Brackets, eight bolts
with Patchlock and washers.
|
Adjustable Drop
Hardware Kit |
Part # |
For chair with 7/8" tubes
For chair with 1" tubes |
32517
32518 |
|
Fixed-Drop Hardware Kits
will drop the seat 1" or 2". Kits include:
four Drop Hooks, eight bolts
with Patchlock and washers.
|
Fixed Drop Hardware
Kit |
Part # |
1" Drop for chair with 7/8" tubes
2" Drop for chair with 7/8" tubes
1" Drop for chair with 1" tubes
2" Drop for chair with 1" tubes |
32617H
32618H
32603H
32604H |
|
|
|
