.
 

Quality cost effective Custom Seating and Therafin Seat & Back Hardware!

 

GENERAL SEAT INFORMATION
  • 1/2" plywood base with, 1/2" radius on the outside corners. The bottom of the plywood is rounded-over.
  • 1/4-20 t-nuts are inserted into 5/16" holes.
  • Visco foam is standard. 1" soft visco foam laminated over 1" medium visco foam, glued to plywood base.
  • Reverse Dartex, smooth side on contact surface, including front gusset.
  • Black vinyl is standard on non-contact surfaces. Color vinyl is available.
  • Zipper placed at rear of seat.

PLEASE SUPPLY THE FOLLOWING INFORMATION

  • Chair manufacturer/model
  • Chair frame width
  • Seat width
  • Useable seat depth
  • Total seat depth

Seat Info needed

GENERAL BACK INFORMATION
  • 1/2" plywood base with, 1/2" radius on the outside corners and 9/16" radius on the inside corners.
  • 1/4-20 t-nuts are inserted into 5/16" holes.
  • Visco foam is standard. 1-1/2" soft visco foam glued to plywood base. The back of the plywood is chamfered.
  • Reverse Dartex, smooth side on contact surface.
  • Black vinyl is standard on non-contact surfaces. Color vinyl is available.
  • All Backs include zipper closure. You select top or bottom zipper placement when ordering.
  • Monogram: Centered on upper 1/3 of cover. Available in BLOCK or , in a variety of colors.

PLEASE SUPPLY THE FOLLOWING INFORMATION

  • Chair manufacturer/model
  • Chair frame width
  • Back width(s)
  • Back height(s)

Back Info needed

 

Color Upholstery